55 Products Found |
|
XFIH-DP1A |
HURRICANE DUAL HNDWHL CODE-RPF 4" INLET XFIH-TP1A
|
|
XFIH-T21A-Z |
HURRICANE TILLER W/CRANK 4" ANSI 150 INL The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-D42A |
HURRICANE DUAL HNDWHL DN80 PN16INLET
|
|
XFIH-DR1A |
HURRICANE DUAL HWHL 4.5"QC 4"ANSI INLET
|
|
XFIH-DL1A |
HURRICANE DUAL HNDWHL CODE-RLF 3" INLET
|
|
XFIH-DW1A-Z |
HURRICANE DUAL CRANK OSCILLATING INLET
|
|
XFIH-T41A |
HURRICANE TILLER DN80 PN16INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-T11A-Z |
HURRICANE TILLER W/CRANK 3" ANSI 150 INL The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83 mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6 mm) is provided for a pressure gauge. 2.5" male NH (64 mm) outlet threads are standard. 2.5" male BSP (64 mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-T61A |
HURRICANE TILLER 3.0"NPTF INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-TX1A |
HURRICANE TILLER CODE-RRM INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-D41A |
HURRICANE DUAL HNDWHL DN80 PN16INLET
|
|
XFIH-D61A |
HURRICANE DUAL HWHL 3.0"NPT FEMALE INLET
|
|
XFIH-TQ1A |
HURRICANE TILLER 4.5"NHF QUICK CONNECT The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIE-FPNJ-Z |
HURRICANE MONITOR - EXTENDED W/ CRANKS The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.
|
|
XFIH-TT1A |
HURRICANE TILLER 4.5"QC CODE-RLF INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
|
XFI-PLNJ-Z |
HURRICANE MONITOR ALUMINUM W/CRANKS The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.
|
|
XFIH-DQ1A-Z |
HURRICANE DUAL CRNK 4.5"NHF QUICKCONNECT
|
|
XFIE-FPNJ-Z |
HURRICANE MONITOR - EXTENDED W/ CRANKS The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.
|
|
XFIH-TT1A |
HURRICANE TILLER 4.5"QC CODE-RLF INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFI-FPNJ |
HURRICANE The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.
|
|
XFI-FLNJ |
HURRICANE The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6 mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.
|
|
XFIH-D52A-Z |
HURRICANE DUAL CRANK DN100 PN16 INLET
|
|
XFI-OXY |
HURRICANE MONITOR ALUMINUM The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.
|
|
XFIH-DU1A |
HURRICANE DUAL HWHL 4.5"QC CODE-RPF INLT
|
|
XFIH-D52A |
HURRICANE DUAL HNDWHL DN100 PN16INLET
|
|
XFIH-DL1A-Z |
HURRICANE DUAL CRANK CODE-RLF 3" INLET
|
|
XPI-FDN80BJ |
HURRICANE MONITOR ALUM - 2.5"BSP OUTLET
|
|
XFIH-D21A |
HURRICANE DUAL HNDWHL 4" ANSI 150 INLET
|
|
XFIH-TW1A-Z |
HURRICANE TILLER OSCILLATING INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-TP1A |
HURRICANE TILLER CODE-RPF 4" INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
|
XFIH-D21A |
HURRICANE DUAL HNDWHL 4" ANSI 150 INLET
|
|
XFIH-TP1A |
HURRICANE TILLER CODE-RPF 4" INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-TR1A |
HURRICANE TILLER 4.5"QC 4"ANSI INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-D61A-Z |
HURRICANE DUAL CRANK 3.0"NPTF INLET
|
|
XFIH-TW1A-Z |
HURRICANE TILLER OSCILLATING INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-T61A |
HURRICANE TILLER 3.0"NPTF INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-TQ1A |
HURRICANE TILLER 4.5"NHF QUICK CONNECT The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-D41A |
HURRICANE DUAL HNDWHL DN80 PN16INLET
|
|
XFIH-TS1A |
HURRICANE TILLER 4.5"QC 4"NPTF INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-D61A |
HURRICANE DUAL HWHL 3.0"NPT FEMALE INLET
|
|
XFIH-D11A |
HURRICANE DUAL HNDWHL 3"ANSI INLET
|
|
XFIF-PLNJ |
HURRICANE MONITOR ALUMINUM The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.
|
|
XFI-PLNJ-Z |
HURRICANE MONITOR ALUMINUM W/CRANKS The Task Force Tips' Hurricane is a durable, industrial, high-capacity fixed monitor. The Hurricane has high flow and low friction loss characteristics. The red powder coat finish (inside and out), and stainless steel elevation drive make the Hurricane one appliance that can stand up to tough service environments. The Hurricane is capable of flowing 1250 gpm (4750 l/min) while maintaining a FULL 360° rotational ability. The lever-action rotational lock is activated in one motion, visually confirmed, and securely holds the Hurricane in position. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. The Hurricane is made from hard anodized ANSI A356-T6 aluminum. The Hurricane industrial monitor comes with our exclusive 5-year warranty.
|
|
XFIH-D21A-Z |
HURRICANE DUAL CRANK 4"ANSI INLET
|
|
XFIH-DX1A-Z |
HURRICANE DUAL CRANK CODE-RRM INLET
|
|
|
XFIH-D21A |
HURRICANE DUAL HNDWHL 4" ANSI 150 INLET
|
|
XFIH-DL1A-Z |
HURRICANE DUAL CRANK CODE-RLF 3" INLET
|
|
XFIH-T71A |
HURRICANE TILLER 4"NPT FEMALE INLET
|
|
XFIH-TW1A-Z |
HURRICANE TILLER OSCILLATING INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XPI-BPBJ |
HURRICANE - ALUMINUM 2.5"BSP M OUTLET
|
|
XFIH-D71A |
HURRICANE DUAL HWHL 4.0"NPT FEMALE INLET
|
|
XFIH-TP1A |
HURRICANE TILLER CODE-RPF 4" INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-DL1A-01 |
HURRICANE DUAL HNDWHL CODE-RLF 3" INLET
|
|
XFIH-TR1A |
HURRICANE TILLER 4.5"QC 4"ANSI INLET The TFT Hurricane is a durable, high-capacity industrial fixed monitor with low friction loss characteristics. The silver powder coat finish (inside and out), and stainless steel worm drives allow the Hurricane to withstand tough service environments. The large 3.25" (83mm) waterway will deliver up to 1250 gpm (4750 l/min). Only eleven (11) turns of the handwheel are necessary to change from vertical to the horizontal elevation setting. A built-in automatic drain protects the monitor from freezing. The placement of grease zerks allows the Hurricane monitor to be quickly and easily serviced and lubricated, and a threaded port 0.25" NPT (6mm) is provided for a pressure gauge. 2.5" male NH (64mm) outlet threads are standard. 2.5" male BSP (64mm) threads available on request. The Hurricane is made from hard anodized aluminum.
|
|
XFIH-D61A-Z |
HURRICANE DUAL CRANK 3.0"NPTF INLET
|
|
|
|